- Comprises one single unit
- Control and display unit in front cover with 4-digit heading display an 6 operating keys
- Easy to install and easy to service
- High-speed follow-up system 100° / sec.
- Rate of turn output
- Automatic static north speed error connection
- Integrated Transmitting Magnetic Compass (TMC) interface
- Compass monitor function
- Highly accurate digital heading data transmission by shaft encoder
- Self-synchronizing repeater compasses
- +/- 180° lignment error corection in setup program
- Will drive a maximum of 12 analogue repeaters
- 7 independent serial outputs RS 422 & NMEA 0183
- 2 independent 6 steps / o heading outputs (0.5 A)
- Complies with IMO regulations A.424 (IX), A.574 (14), A.821(19) - HSC (High-Speed Craft) and ISO 8728
- Outputs to Voyage Data Printer:
- Heading
- Heading source gyro / magnetic
- Rudder angles of two independent rudders
- Insensitive to horizontal acceleration
- The combined effect of the twin rotors and the liquid damping system prevent latitude error
- High MTBF (mean time between failures) and low power consumption
- All repeater compasses with serial interface
- Automatic emergency power changeover and status alarm
- Gyro system remains north stabilized during power interruptions of up to 3 minutes
- Single point suspension of the gyrosphere container eliminates the well-known adverse effects associated with gimbals
- Monitoring and alarm functions for all voltages, gyroscope current and follow-up system
For operating in extremely heavy seas where highly accurate heading information is absolutely essential, the NAVIGAT X MK 1 Mod. 7 gyrocompass, equipped with a special gyrosphere container, is recommended. Here, the unique centering pin retaining arrangement for the gyrosphere is mounted in an additional gimbal system, which allows the NAVIGAT X MK 1 Mo 7 gyrocompass an almost unlimited freedom of roll an pitch (+- 90°).
NAVIGAT X MK 1 has been type approved by the German Federal Maritime and Hydrographic Agency (BSH).
Optional features
- Automatic dynamic north speed error correction
- Remote control unit Compass Monitor for additional operational convenience
- Magnetic compass with flux-gate
- Analogue and digital repeaters
- Voyage Data Printer
- Conventional, adaptive and high-speed code autopilots
- Rudder angle feedback units
- Electromagnetic speed log
- Electronic compass with NMEA 0183 interface
- Inputs an Outputs for all Basic Systems
There are some optional configuration of NAVIGAT X MK 1 Digital Gyrocompass System with Automatic Static and Dynamic North Speed Error Correction. The first is Single Gyrocompass System with TMC Function (fig. 4.9) including magnetic compass with flux gate, Navitwin III compass monitor and switch-over unit. Other configuration (fig. 4.10) includes two gyrocompasses, Navitwin III compass monitor and switch-over unit. In Dual Gyrocompass with TMC Systems (fig. 4.11) an additional isolation amplifier is required.
Multiple Digital Heading Reference Monitor and Transmitting Magnetic Compass System NAVITWIN III (fig. 4.12) has the next displays and keys:
|
|
1. Liquid crystal heading display with LED background illumination. Indicates in 4 lines of 9 characters the headings of GYRO 1, GYRO 2 and MAGNETIC compass, and also the preset heading Difference ALARM threshold. The difference in heading is selectable between: GYRO 1 and GYRO 2, or GYRO 1 and MAGNETIC compass, or GYRO 2 and MAGNETIC compass. The alarm threshold range is
from 1° to 35° in increments of 1°.
2. Main liquid crystal display with 112 characters in 4 lines and LED background illumination. Provides the user with all necessary operational data and speed, latitude, longitude, roll and pitch angles, and rate of turn about all three axes (x,y,z).
3. Selects GYRO 1 as heading information source (selection only in a manual steering mode).
4. Selects GYRO 2 as heading information source (selection only in a manual steering mode).
5. Selects magnetic compass as heading information source (selection only in a manual steering mode).
 |
6. Function keys. In combination with the main display, the function keys provide the user with a menu controlled, high-level operation dialogue.
7. The cursor keys simplify the selection of menu pages and the editing of operational data.
8. Key pad with 16 logically arranged keys for the input of operational data, selection of menu pages, alarm reset, test functions and illumination control.
The dimensions of front panel are 288 x 96 mm, depth - 65 mm, weight - 0.8 kg Power Requirements 24 VDC.