Modern homes have become accustomed to build in a very simple style, without any additional architectural elements and design excesses. The present houses are buildings with classic straight walls and an ordinary gable (sometimes flat) roof.
This architectural solution can significantly reduce the number of sources for heat leakage to the outside, thereby increasing the energy efficiency of the house, which saves on its heating.
The choice of material for decoration, its type and color, should also be based on the final result, it should be in harmony not only with the surrounding territory, but also with the building itself, with its base, roof, windows and other elements.
The modern building market represents a wide range of various finishing materials, various colors and shades. Thanks to this, today everyone has the opportunity to realize the brightest and most interesting design solutions.
The appearance of the building can mainly distinguish it from other buildings due to the bright, original facade, and well-chosen decoration, as is known, can visually increase the size of the house. Bright new colors can be used for the entire facade, and to highlight specific parts of the house.
For example, if you want a house in a classic style, you need to combine the white facade with red tile, and for the modern style it will be enough to emphasize some elements of the building with a dark color or to trim them with another material, different from the main one.
Modern facades of houses have one distinctive feature, which lies in the fact that now for their decoration are very often used cold shades.
The leading place is taken by white color, however, black and gray colors and their various shades, ranging from silver to graphite, are also in high demand.
General layout design for building S1: 500
In practice, the construction site highlights the urban architecture.
Here, for the design of the general plan, the construction site was chosen by a computer program. To do this, demolish the old low-rise buildings. The construction site was chosen at the intersection of Ryskulov and Abay streets. Master Plan tied to these streets.
The general plan shows: - Table of buildings
- Calculation of the need for parking
Conventions that include:
- Red line
- Borders of the construction site
- Lawns and gardening
- Pavement
- Highway with asphalt
- blind area
- Parking
Technical and economic indicators
- Construction area
- Total area of the building
- Total administrative area
- Building volume
F.7.14-02
MINISTRY OF EDUCATION AND SCIENCE
REPUBLIC OF KAZAKHSTAN
Department: Architecture
EXPLANATORY NOTE
to the course project on discipline
____________________________________________
in the specialty _____________________________________
The project (work) is protected.
rated ____________
Student ________________
assessment signature, name, group
"_____" ________ 2018
Head _____________
signature, full name
Commission: ____________
Signature, full name
Normocontrol
Meirmanov M.S.___________
signature, full name
Shymkent, 2018
F.7.14-03
SOUTH KAZAKHSTAN STATE UNIVERSITY
named after. M.O.AUEZOV
Department: __________________________________________
Affirm
Head of the Department
Imanaliyev K.E.
“04” December 2018
Job ____
on the course project for the discipline:
Student: Ibrayeva B. Group: SM- 16- 5k2
Subject of project: Botanic garden
Initial data:________________________________________________________
| № | The contents of the explanatory note | Deadlines | Approximate volume (number of sheets) |
| Facade | 10.09.2018 | ||
| Plan | 10.10.2018 | ||
| Slice | 10.11.2018 | ||
| General plan | 04.12.2018 | ||
| Perspective | 04.12.2018 |
| № | The content of the graphic part | Deadlines | Number of sheets | format |
| EXPLANATORY NOTE | 04.12.2018 | A4 | ||
References:
1 Юсупов А.Н.Лихачев Е.Н. Архитектурная композиция и методы ее построения Алматы «Эверо»2015, 120 с.
2 В.В, Адамович, Б.Г. Бархин, В.А, Варежкин и др. Архитектурное проектирование общественных зданий и сооружений. Уч. для ВУЗов под общ. ред. И.Е Рожина, А.И. Урбаха
3 Бархин Б.Г. методика архитектурного проектирование. Уч.- мет. пособие М. Стройиздат 1993
4 Гельфонд. А.Л.. Архитектурное проектирование общественных зданий и сооружений уч. пособие. М.: «Архитектура – С» 2006
5 Змеул С.Г. Маханько Б.А. Архитектурная типология зданий и сооружений. М.: «Архитектура – С» 20062.
6. Маклакова Т.Г,, Нанасова С.М., Шарапенко В.Г,, Балакина А.Е. Архитектура М.: Издательство АСВ.2004
1.. Какорин В.Д..Архитектурная типология зданий и ссоружений.Алматы.2008,278 с.
2. Е.Н.Безручко Английский. для архитекторов М.2004.192 с.
3. Джеймс Каминг Английский язык для архитекторов и строителей М.2005.270 с.
F.7.14-04
Ministry of Education and Science of the Republic of Kazakhstan
South Kazakhstan State University named after M.Auezov
Faculty "Building and transport »
Department "Architecture"
"Affirm"
Head of Department
Imanaliyev K.E.
_________________
“04”december 2018
Protocol number __
protection course project
discipline Architecture projecting 5 Monofunctional building
student group: SM – 16 - 5k2
Theme of the course project: Botanic garden
________________________________________________
During the defense, the following questions were answered:
1. Name of the tallest building of the world?
2. What forms of buildings are resistant to earthquake?
3. What kinds the role of open spaces in the architectural ensamble of the village center, of the city?
When executing the course project, points were received (out of 60 possible) _____, protection is estimated (out of 40 possible) as _____ points. Total scores _____________
Evaluation of the project (work) ____________
Head of course project (work) _____________
Commission member __________________
Commission member _________________________________
Date of protection 04.12.2018.
Normative references was used for this documents in this course project:
СНиП РК 3.02 -02 -2009Общественные здания
СНиП РК 2.04 -01 -2001Строительная климатология
СНиП РК 003 -30-2006Строительство в сейсмических районах
ГОСТ 2.304-81 - Шрифты чертежные
ГОСТ 2.305-68 - Изображение - планы, разрезы.
ГОСТ 2.307-68 - Нанесение размеров и определенных отклонений
ГОСТ 2.316 - Правила нанесения на чертежах надписей, технических требований и таблиц